Le 26 septembre 2016, 03:58 dans Humeurs • 0
Main article: Spin RF Welding Companies
Spin welding is a particular form of frictional welding. With this process, one component with a round weld joint is held stationary, while a mating component is rotated at high speed and pressed against the stationary component. The rotational friction between the two components generates heat. Once the joining surfaces reach a semi-molten state, the spinning component is stopped abruptly. Force on the two components is maintained until the weld joint cools and re-solidifies. This is a common way of producing low- and medium-duty plastic wheels, e.g., for toys, shopping carts, recycling bins, etc. This process is also used to weld various port openings into automotive under hood components.
This technique requires one part to be transmissive to a laser beam and either the other part absorptive or a coating at the interface to be absorptive to the beam. The two parts are put under pressure while the laser beam moves along the joining line. The beam passes through the first part and is absorbed by the other one or the coating to generate enough heat to soften the interface creating a permanent weld.
Semiconductor diode lasers are typically used in plastic welding. Wavelengths in the range of 808 nm to 980 nm can be used to join various plastic material combinations. Power levels from less than 1W to 100W HF Welding Machine are needed depending on the materials, thickness and desired process speed